Turn Signal & Multifunction Switch - Disassemble

Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle

Caution: Refer to SIR Caution in Service Precautions.





1. Disable the inflatable restraint steering wheel module.
2. Remove the upper and lower trim covers.
3. Remove the wire harness assembly (4) out of the wire harness strap (5).
Remove the wire harness straps (3) from the wire harness assembly (4).
Remove the wire harness strap (2) from the upper tilt head assembly (1).





4. Slide the 2 connectors (2) off of the bulk head connector (1).





5. Remove the 2 pan head tapping screws.





6. Remove the turn signal and multifunction switch assembly.