Steering Wheel

Steering Wheel Replacement

Tools Required
- J1859-A Steering Wheel Puller

Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.

1. Remove the inflatable restraint steering wheel module.





2. Mark the relationship of the steering wheel (1) to the column.
3. Remove the steering wheel and the nut (2).





4. Use the J1859-A in order to remove the steering wheel from the column.

Installation Procedure





1. With the marked relationship references in line, install the steering wheel (1) onto the column.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the steering wheel nut (2).
Tighten the steering wheel nut to 41 Nm (30 ft. lbs.).
3. Install the inflatable restraint steering wheel module.