One Access Panel Inoperative

ONE ACCESS PANEL INOPERATIVE

CIRCUIT DESCRIPTION
Pro/Access models use the key fob to activate up to 3 access panels depending on the cargo door option:
- One access panel on the right side of all vehicles.
- One access panel on the left side of vehicles equipped with left side cargo doors.
- Two access panels on the left side of vehicles not equipped with left side cargo doors.

This vehicle is not equipped with remote keyless entry system (RKE). The keyless entry transmitter and remote control door lock receiver (RCDLR) are used exclusively to operate the access panels. When you press any button on a programmed keyless entry transmitter, the transmitter sends a signal to the RCDLR. The RCDLR sends a class 2 message to the body control module (BCM) which performs the requested access panel function.

TEST DESCRIPTION

Steps 1-6:

Steps 7-10:

Steps 11-17:

Steps 18-25:

Steps 26-29:

The numbers below refer to the step numbers on the diagnostic table.
5. This step tests the primary circuit of the access panel relay.
7. This step tests if the remote control door lock receiver is receiving and acting on an input from the transmitter.
14. An open RFA fuse may be caused by a short to ground in the access panel actuator voltage supply circuit or a shorted access panel actuator.