60000 MI or 96000 KM
LubricateSteering and Suspension
Lubricate the front suspension, ball joints, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, and brake front axle. Ball joints should not be lubricated unless their temperature is -12 degrees C (10 degrees F) or higher or they could be damaged.
Inspect
Heat Shield, Exhaust
Inspect shields and underhood insulation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly. Tighten connections and fasteners or replace damaged parts as necessary.
Fluid - Differential
Inspect front/rear axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking.
Evaporative Emissions System
Inspect the Evaporative Control System. Inspect all the fuel and vapor lines and the hoses for proper hook-up, routing and condition. Ensure that the purge valve works properly, if equipped. Replace the components as needed.
Brakes and Traction Control
Inspect front/rear axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking.
Replace
Oil Filter, Engine
Fuel Filter
Engine Oil
Change engine oil and filter as indicated by the GM Oil Life System (or every 10,000 miles 16 000 km, or 12 months, whichever occurs first. Reset the system.
Air Filter Element
Rotate
Tires