Blower Motor: Service and Repair
BLOWER MOTOR REPLACEMENTREMOVAL PROCEDURE
1. Remove the right hinge pillar trim panel.
2. Remove the blower motor mounting screws.
3. Remove the blower motor cooling tube (2).
4. Disconnect the blower motor electrical connector (4).
5. Remove the blower motor (3).
INSTALLATION PROCEDURE
1. Install the blower motor (3).
2. Connect the blower motor electrical connector (4).
3. Install the blower motor cooling tube (2).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the blower motor mounting screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
5. Install the right hinge pillar trim panel.