92. Intake Manifold Installation

Intake Manifold Installation





1. Install a new intake manifold gasket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the intake manifold and bolts.
^ Tighten the intake manifold bolts from the inside out to 10 Nm (89 inch lbs.).





3. Install a new throttle control module gasket.
4. Install the throttle control module.
5. Add sealer GM P/N 12346004 (Canadian P/N 10953480) to the throttle control module bolt threads.
6. Install the throttle control module bolts.
^ Tighten the throttle control module bolts to 10 Nm (89 inch lbs.).