Engine Lift Bracket Replacement
Engine Lift Bracket ReplacementRemoval Procedure
1. Remove the drive belt.
2. Remove the bolt (3) securing the A/C compressor hose/pipe bracket (2) to the engine lift bracket (1).
3. Carefully disengage the engine wiring harness conduit (4) from the engine lift bracket (1)
4. Remove the 3 generator mounting bolts.
5. Remove the bolts securing engine lift bracket to the engine.
6. Remove the engine lift bracket from the engine.
Installation Procedure
1. Position the engine lift bracket to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts securing engine lift bracket to the engine. Tighten
2.1. Tighten the engine lift bracket bolts in sequence to 5 Nm (44 inch lbs.).
2.2. Tighten the engine lift bracket bolts in sequence to 50 Nm (37 ft. lbs.).
3. Position the generator to the engine.
4. Install the generator mounting bolts.
^ Tighten the generator mounting bolts in sequence to 50 Nm (37 ft. lbs.).
5. Engage the engine wiring harness conduit (4) to the engine lift bracket (1).
6. Install the bolt (3) securing the A/C compressor hose/pipe bracket (2) to the engine lift bracket (1).
^ Tighten the A/C compressor hose/pipe bracket bolt to 9 Nm (80 inch lbs.).
7. Install the drive belt.