Fog/Driving Lamp: Service and Repair
FOG LAMP REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Remove the fog lamp bulb and socket.
2. Remove the bolt (1) securing the fog lamp to the fascia.
3. Remove the fog lamp (2).
INSTALLATION PROCEDURE
1. Position the fog lamp (2) to the fascia.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fog lamp to fascia bolts (1).
Tighten
Tighten the bolts to 2.5 N.m (22 lb in).
3. Install the fog lamp bulb and socket.