Horn: Service and Repair
HORN REPLACEMENTREMOVAL PROCEDURE
1. Remove the grille.
2. Disconnect the horn assembly electrical connector.
3. Remove the bolt that retains the horn assembly to the radiator support.
4. Remove the horn assembly from the body.
INSTALLATION PROCEDURE
1. Install the horn assembly to the radiator support.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolt that retains the horn assembly to the radiator support.
Tighten
Tighten the bolt to 10 N.m (88 lb in).
3. Connect the horn assembly electrical connector.
4. Install the grille.