Accessory Switch Replacement

ACCESSORY SWITCH REPLACEMENT

REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) accessory trim plate.




2. Remove the fasteners retaining the switch to the trim plate.




3. Remove the switch from the trim plate.

INSTALLATION PROCEDURE




1. Install the switch to the trim plate.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the fasteners retaining the switch to the trim plate.

Tighten
Tighten the fastener to 2.5 N.m (22 lb in).

3. Install the I/P accessory trim plate.