22. Crankshaft Balancer Removal

Crankshaft Balancer Removal

^ Tools Required:
- J 41816-2Crankshaft End Protector





1. Remove and discard the crankshaft balancer bolt.





2. Install J 41816-2 into the end of the crankshaft.

Important: Do not pull on outer edge of the crankshaft balancer.

Important: The friction washer may come off with the crankshaft balancer.

3. Use a three jaw puller to remove the crankshaft balancer.
4. Remove J 41816-2.