Locking Differential Clutch Disc Assembly - Assemble (8.0 Inch Axle)

Locking Differential Clutch Disc Assembly - Assemble (8.0 Inch Axle)





1. Apply axle lubricant, GM P/N 12378261 or equivalent meeting GM Specification 9986115, to the surface of each disc.
2. Assemble the right side or bell - end side clutch disc assembly as follows:
2.1. Install the 1st non-carbon eared disc (3) to the side gear (1).
2.2. Install the 1st splined disc (4).
2.3. Install the 2nd non-carbon eared disc (5).
2.4. Install the 2nd splined disc (6).
2.5. Install the 3rd non--carbon eared disc (7).
2.6. Install the guide clips (2) to the clutch discs (2-7). Apply grease to the guide clips in order to hold the clips in place on the disc ears.