Seat Riser Trim Cover Replacement - Power

SEAT RISER TRIM COVER REPLACEMENT - POWER

REMOVAL PROCEDURE




1. Remove the screws from the seat riser trim cover.
2. Remove the seat bolts from the seat to riser.
3. Remove the side trim covers from the seat riser.
4. Remove the screws that retain the power seat trim plate to the cover.
5. Disconnect the power seat switch electrical connector.
6. Remove the power seat switch from the trim plate by snapping the switch out.

INSTALLATION PROCEDURE
1. Install the power seat switch to the trim plate by snapping the switch into place.
2. Connect the power seat switch electrical connector.




3. Install the screws that retain the power seat trim plate to the cover.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screws that retain the power seat trim plate to the cover to 2 N.m (18 lb in).

4. Install the seat bolts to the seat riser.

Tighten
Tighten the riser to seat retaining bolts to 30 N.m (22 lb ft).

5. Install the seat riser trim cover.
6. Install the screws to seat riser trim cover.

Tighten
Tighten the screws to seat riser trim cover to 2 N.m (18 lb in).