Seat Back Cover and Pad Replacement - Rear With RPO Code YC7
SEAT BACK COVER AND PAD REPLACEMENT - REAR WITH RPO CODE YC7REMOVAL PROCEDURE
1. Remove the rear bench seat to the vehicle.
2. Remove the rear seat headrest.
3. Remove the rear seat armrests.
4. Remove the J-hook along the bottom edge of the seat back.
5. Separate the J-hook fasteners that retain the sea back cover to the pad along the seat back break line.
6. Remove the seat back cover and pad from the seat back.
7. Remove the pad from the seat back frame.
INSTALLATION PROCEDURE
1. Install the pad to the seat back frame.
2. Install the seat back cover to the seat back.
2.1. Center the seat back cover on the pad.
2.2. Starting at the top and working down the sides, apply pressure along the break line in order to help attach the seat back cover to the J-hook to the frame and attach the hook and loop.
IMPORTANT: For the best finished appearance, proceed as follows when attaching the seat back cover to the pad:
3. Install the seat back to the frame and attach.
4. Install the armrests.
5. Install the headrests.
6. Install the rear bench seat to the vehicle.