Seat Back Hinge Trim Replacement - Rear Left

SEAT BACK HINGE TRIM REPLACEMENT - REAR LEFT

REMOVAL PROCEDURE
1. Remove the rear bench seat to the vehicle.
2. Remove the screw retaining the lower hinge cover.




3. Pry off the lower hinge cover.




4. Pry off the upper hinge cover.

INSTALLATION PROCEDURE
1. Install the upper seat back hinge cover as follows:
1.1. Align the fasteners with the hinge.




1.2. Press the lower seat back hinge cover into place.
2. Install the lower seat back hinge cover as follows:
2.1. Align the fasteners with the hinge.




2.2. Press the upper seat back hinge cover into place.
3. Install the lower seat back hinge cover retaining screw.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the lower seat back hinge cover retaining screw to 2 N.m (18 lb in).

4. Install the rear bench seat to the vehicle.