Operation CHARM: Car repair manuals for everyone.

Headlamp Replacement - Sealed Beam

HEADLAMP REPLACEMENT - SEALED BEAM

REMOVAL PROCEDURE




1. Turn OFF the headlamp switch.
2. Remove the headlamp retaining ring screws.
3. Remove the headlamp retaining ring.
4. Remove the headlamp.
5. Disconnect the headlamp electrical connector.

INSTALLATION PROCEDURE




1. Connect the headlamp electrical connector.
2. Install the headlamp retaining ring.
3. Install the headlamp.
4. Install the headlamp retaining ring screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten headlamp retaining ring screws 8 N.m (70 lb in).