Tilt Spring - Assemble

Tilt Spring - Assemble - Off Vehicle





1. Lubricate the tilt spring (2) with synthetic grease.
2. Install the spring guide (1) into the tilt spring (2).





Caution: The tilt spring and the spring guide are under pressure. The tilt spring and the spring guide may become a projectile. Secure the spring with locking pliers daring removal. Secure the sprag with locking pliers during installation. Bodily injury may result during removal and installation of the tilt spring and the spring guide. Always use caution during removal and Installation of the tilt spring and the spring guide.

3. Install the tilt spring (1).
3.1. Install the tilt spring (1) to the post on the steering column support assembly (2).
3.2. Secure the tilt spring (1) with locking pliers.
4. Install the upper and lower trim covers.
5. Enable the inflatable restraint steering wheel module.