Service AWD Indicator Inoperative

SERVICE AWD Indicator Inoperative

Circuit Description
The SERVICE AWD indicator is located in the instrument cluster. It receives ignitions voltage from a 10 amp gage fuse through the ignition 1 voltage circuit. This circuit also supplies all of the gages with ignition voltage. The transfer case shift control module controls the SERVICE AWD indicator by sending the instrument cluster a Class 2 message.

This lamp may be controlled with the scan tool using the instrument cluster output controls.

Test Description
The numbers below refer to the step numbers on the diagnostic table.
2. This step determines whether the failure is the result of a faulty transfer case shift control module or the instrument cluster.

Steps 1 - 4:

SERVICE AWD Indicator Inoperative