Transfer Case Will Not Correct Slip
Transfer Case Will Not Correct SlipCircuit Description
The transfer case shift control module senses rear to front slip, a difference of rear to front wheel speed, attempts to correct the difference by activating the encoder motor, to apply more torque to the front wheels.
Test Description
The numbers below refer to the step numbers on the diagnostic table.
2. Determines if the transfer case shift control module is setting DTCs C0300 or C0305.
3. Helps determine if the fault is set due to a mechanical or an electrical fault.
4. Tests the integrity of the Motor Control circuit.
5. Determines whether the transfer case clutch pack is holding.
Steps 1 - 9:
Transfer Case Will Not Correct Slip