81. Oil Level Indicator and Tube Installation
Oil Level Indicator and Tube Installation1. Apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent. around the oil level indicator tube 13 mm (0.5 inch) below the tube bead.
2. Install the oil level indicator tube into the engine block. Rotate the oil level indicator tube into position.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the oil level indicator tube bolt.
^ Tighten the oil level indicator tube bolt to 12 Nm (106 inch lbs.).
4. Install the oil level indicator into the oft level indicator tube, if required.