Door Replacement - Front

Door Replacement - Front

Removal Procedure





1. Remove the Trim Panel. Refer toTrim Replacement - Hinge Pillar (Trim Replacement - Hinge Pillar) in Interior Trim.
2. Disconnect the electrical connectors in the hinge pillar for the door wire harness.
3. Push the rubber conduit out from the hinge pillar in order to remove the rubber conduit from the hinge pillar.
4. Remove the wire harness from the hinge pillar.
5. Remove the check link from the hinge pillar. Refer to Door Check Link Replacement - Front (Door Check Link Replacement - Front) .
6. Remove the hinge pins (2) from the door. Refer toDoor Hinge Pin and Bushing Replacement - Front Door (Door Hinge Pin and Bushing Replacement - Front Door) .
7. With an assistant, remove the door from the vehicle.



Installation Procedure





1. With an assistant, install the door to the vehicle.
2. Install the hinge pins (2) to the door. Refer to Door Hinge Pin and Bushing Replacement - Front Door (Door Hinge Pin and Bushing Replacement - Front Door) .
3. Install the check link to the hinge pillar. Refer to Door Check Link Replacement - Front (Door Check Link Replacement - Front) .
4. Install the wire harness to the hinge pillar.
5. Push the rubber conduit into the hole in the hinge pillar.
6. Connect the electrical connectors for the front door wire harness.
7. Install the Trim Panel. Refer to Trim Replacement - Hinge Pillar (Trim Replacement - Hinge Pillar) in Interior Trim.