Mode Door - Lower
MODE DOOR REPLACEMENT - LOWERREMOVAL PROCEDURE
1. Remove the heater assembly.
2. Disconnect the vacuum hose from the lower mode actuator (2).
3. Remove the lower mode actuator (2) from the heater assembly (4).
4. Remove the linkage from the lower mode actuator (2).
5. Remove the heater assembly cover screws.
6. Remove the heater assembly cover.
7. Remove the lower mode door (1) to the heater assembly (2).
INSTALLATION PROCEDURE
1. Install the lower mode door (1) to the heater assembly (2).
2. Install the heater assembly cover.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the heater assembly retaining screws.
Tighten
Tighten screws to 1.9 N.m (17 lb in).
4. Install the linkage to the lower mode actuator (2).
5. Install the lower mode actuator (2) to the heater assembly.
6. Connect the vacuum hose to the lower mode actuator (2).
7. Install the heater assembly.