Radiator Hose Outlet - Starter/Generator Control Module Replacement
Radiator Hose Outlet - Starter/Generator Control Module ReplacementRemoval Procedure
1. Drain the Starter/Generator Control Module (SGCM) cooling system.
2. Remove the SGCM radiator outlet hose (5) from the SGCM radiator (2).
3. Remove the SGCM radiator outlet hose (5) from the clip (4).
4. Remove the SGCM radiator outlet hose from the clip (3).
5. Remove the SGCM radiator outlet hose from the clip.
6. Reposition the SGCM radiator outlet hose clamp (2) from the SGCM (3).
7. Remove the SGCM radiator outlet hose (1) from the SGCM (3).
8. Remove the SGCM radiator outlet hose (1) from the vehicle.
Installation Procedure
1. Install the SGCM radiator outlet hose (1) to the vehicle.
2. Install the SGCM radiator outlet hose (1) to the SGCM (3).
3. Position the SGCM radiator outlet hose clamp (2) to the SGCM (3).
4. Install the SGCM radiator outlet hose to the clip.
5. Install the SGCM radiator outlet hose to the clip (3).
6. Install the SGCM radiator outlet hose (5) to the clip (4).
7. Install the SGCM radiator outlet hose (5) to the SGCM radiator (2).
8. Notice: The procedure below must be followed. Improper coolant level could result in a low or high coolant level condition, causing starter/generator control module damage.
Fill the SGCM cooling system.