84. Engine Coolant Air Bleed Pipe Installation

Coolant Air Bleed Pipe Installation






1. Important:
^ Install the pipe gaskets properly onto the pipe and covers.
^ Position the gasket O-ring seal onto the nipple portion of the pipe.

Install the gaskets onto the engine coolant air bleed pipe and covers.





2. Install the pipe (307) and gaskets (308) onto the cylinder heads.

3. Notice:
Refer to Fastener Notice in Service Precautions.

Install the pipe bolts (309).
^ Tighten the pipe bolts to 12 Nm (106 lb in).





4. Install the covers (313), gaskets (308), and bolts (312) onto the rear of the engine.
^ Tighten the cover bolts to 12 Nm (106 lb in).





5. Install the hose (311) and clamps (310) onto the pipe (307).