Air Cleaner Housing: Service and Repair

AIR CLEANER ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector (1).
2. Remove the air cleaner outlet duct.




3. Grasp the air filter assembly (1) and pull the assembly retaining pins (2) away from the grommets (3).

INSTALLATION PROCEDURE




1. Line up the retaining pins (2) with the grommets (3) in the bracket.
2. Install the air cleaner assembly until the air cleaner is seated fully on the mounts and is up against the fender apron.




3. Install the air cleaner outlet duct.
4. Connect the MAF/IAT sensor electrical connector (1).