80. Water Pump Installation

Water Pump Installation

^ Tools Required
- J 41240 Fan Clutch Remover and Installer





1. Install the water pump and gaskets.






2. Notice: Refer to Fastener Notice in Service Precautions.

Install the water pump bolts.
^ Tighten the water pump bolts a first pass in sequence to 25 Nm (18 lb ft).
^ Tighten the water pump bolts a final pass in sequence to 50 Nm (37 lb ft).





3. Install the water pump pulley (303) and bolts (302).





4. Use the J 41240 in order to retain the water pump pulley.
Tighten the water pump pulley bolts to 25 Nm (18 lb ft).