Wiring Harness Replacement - Door

Wiring Harness Replacement - Door

Removal Procedure

1. Remove the hinge pillar trim panel.




2. Disconnect the cross body wiring harness.
3. Remove the conduit.
4. Remove the trim panel upper extension.
5. Remove the trim panel.
6. Remove the water deflector.




7. Disconnect the following components:

* The outside power mirror (1)
* C203 (4)
* P500 (5)
* The speaker (6)
* The power window motor (7)
* The power lock switch (8)
* The power window switch (9)
* The power mirror switch (10)
* The door lock actuator

8. Remove the door wiring harness from the door, pulling it through the conduit (3).

Installation Procedure

1. Install the door wiring harness to the door, pulling connectors 4 and 5 through the conduit (3).




2. Connect the following components:

* The outside power mirror (1)
* C203 (4)
* P500 (5)
* The speaker (6)
* The power window motor (7)
* The power lock switch (8)
* The power window switch (9)
* The power mirror switch (10)
* The door lock actuator

3. Install the water deflector.
4. Install the trim panel.
5. Install the trim panel upper extension.
6. Install the conduit.




7. Connect the cross body wiring harness.
8. Install the hinge pillar trim panel.