Frontal Air Bag Deployment - Component Replacement/Inspections

ACCIDENT WITH FRONTAL AIR BAG DEPLOYMENT - COMPONENT REPLACEMENT AND INSPECTIONS

After a collision involving frontal air bag deployment, replace the following components. If you detect any damage to the mounting points or mounting hardware, repair or replace the mounting points and mounting hardware as needed.
- Inflatable restraint front end sensors
- Inflatable restraint I/P module
- Inflatable restraint sensing and diagnostic module (SDM)
- Inflatable restraint steering wheel module

After a collision involving frontal air bag deployment, perform the following inspections.
- Inspect the steering wheel module coil and coil wiring pigtail for melting, scorching, or other damage due to excessive heat.
- Inspect the passenger presence system (PPS) for damage to the wiring or pressure system.

Perform these component inspections in addition to the inspections indicated above in Accident With or Without Air Bag Deployment. If you detect any damage, replace the component. If you detect any damage to the mounting points or mounting hardware, repair or replace the mounting points and mounting hardware as needed.