Inspection/Maitenance (I/M) Complete System Set Procedure
INSPECTION/MAINTENANCE (I/M) COMPLETE SYSTEM SET PROCEDUREDESCRIPTION
The purpose of the I/M Complete System Set Procedure is to satisfy the enable criteria necessary to execute all of the I/M system monitors. When all system monitors are completed, the I/M System Status indicators are set to YES. Perform this procedure when more than one of the I/M System Status indicators are set to NO.
CONDITIONS FOR RUNNING
Cold start
- The battery voltage is between 11-18 volts.
- The engine coolant temperature (ECT) is between 60-96.75°C (140-206.2°F).
- The intake air temperature (IAT) is more than 5.25°C (41.5°F).
- The barometric pressure (BARO) is more than 74 kPa.
TEST
