Hood Hinge: Service and Repair

Hood Hinge Replacement

Removal Procedure

Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

1. Raise and support the hood.




2. Remove the hinge to the hood bolts.
3. Remove the hinge from the hood.

Installation Procedure






Notice: Refer to Fastener Notice in Service Precautions.

1. Install the hinge to the hood bolts.

Tighten the hinge to the hood bolts to 25 N.m (18 lb ft).

2. Remove the hood support and lower hood.