PTO Cover Gasket Replacement

PTO Cover Gasket Replacement

Removal Procedure





1. Remove 6 bolts (3).
2. Remove the power take-off (PTO) cover (2) and gasket (1). Discard the used gasket.
3. Ensure the PTO gasket face on the main housing is free of all foreign material, nicks and scratches.

Installation Procedure





1. Install the new PTO cover gasket (1) and cover (2).

2. Notice:
Refer to Fastener Notice in Service Precautions.

Start the top-center bolt (3) first. Install the other 5 bolts.
^ Tighten all bolts to 43 Nm (32 ft. lbs.).