Air Flow Meter/Sensor: Service and Repair

MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector (1).




2. Remove the MAF/IAT sensor screws.
3. Remove the MAF/IAT sensor (1).

INSTALLATION PROCEDURE




1. Install the MAF/IAT sensor (1).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the MAF/IAT sensor screws.

Tighten
Tighten the screws to 8 N.m (70 lb in).




3. Connect the MAF/IAT sensor electrical connector (1).