Water-In-Fuel Sensor Replacement

WATER-IN-FUEL SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Drain the fuel from the fuel filter. Refer to Water-in-Fuel Draining Procedure.
2. Disconnect the water-in-fuel sensor electrical connector (1).




3. Remove the water-in-fuel sensor (3) from the fuel filter (2).

INSTALLATION PROCEDURE

IMPORTANT: The water-in-fuel sensor must ONLY be tightened by hand.




1. Install the water-in-fuel sensor (3) to the fuel filter (2).




2. Connect the water-in-fuel sensor electrical connector (1).