48. Rotating Clutch Housing Tone Wheel Replacement

Rotating Clutch Housing Tone Wheel Replacement

Removal Procedure

Tools Required
^ J43767 Tone Wheel Staker
^ J43768 Tone Wheel Driver





1. Grind the stakes from the rotating clutch housing (1).





2. Position the rotating clutch housing (2) on a press so that the front of the housing is down.
3. Install J43768(1) onto the tone wheel (3).
4. Using J43768 (1), press the tone wheel (3) from the rotating clutch housing (2).

Installation Procedure





1. Position the rotating clutch housing (3) on a press so that the front of the housing is facing up.
2. Align the tone wheel (2) so that the outside edge is facing up.
3. install the tone wheel (2) onto the rotating clutch housing.
4. Install J43768 (1) onto the tone wheel.
5. Using J43768 (1), press the tone wheel onto the rotating clutch housing.





6. Locate 4 positions on the rotating clutch housing (3), 90 degrees apart from each other, that have not been previously staked.
7. Install J43767 onto the rotating clutch housing with the 2 staking prongs at 2 of the 4 staking positions.
8. Install J43768 (1) onto J43767 (2).

Notice: Stake the tone wheel to 9 tons. The accuracy of the pressure gauges on presses varies. Start at a lower pressure and increase to 9 tons. Too great a pressure will distort the tone wheel. Too little pressure will result in stakes that will not hold.

9. Stake the tone wheel to the rotating clutch housing.

Important: If necessary, tap J43768 and J43767 to remove the tools from the rotating clutch housing.

10. Remove the J tools.
11. Install J43767 onto the rotating clutch housing with the 2 staking prongs at the remaining 2 staking positions.
12. Install J43768 (1) onto J43767 (2).

Notice: Stake the tone wheel to 9 tons. The accuracy of the pressure gauges on presses varies. Start at a lower pressure and increase to 9 tons. Too great a pressure will distort the tone wheel. Too little pressure will result in stakes that will not hold.

13. Stake the tone wheel to the rotating clutch housing.

Important: If necessary, tap J43768 and J43767 to remove the tools from the rotating clutch housing.

14. Remove the J tools.