66. C4 Clutch Plate Inspection

C4 Clutch Plate Inspection





Important:
^ Measure as described below at 3 or more locations.
^ Check the plates for coning on a level surface.
^ Replace any parts not meeting specifications.

1. Measure the thickness of each C4 clutch friction plate (1) at dimension A.
The minimum thickness is 2.375 mm (0.0935 inch).
2. Measure the oil groove depth of each C4 clutch friction plate (1) at dimension B.

The minimum oil groove depth is 0.2 mm (0.0079 inch).





3. Measure the cone of each C4 clutch friction plate (1) at dimension A.

The maximum cone is 0.225 mm (0.0089 inch).





4. Measure the thickness of each C4 clutch reaction plate (1) at dimension A.
The minimum thickness is 2.44 mm (0.096 inch).
5. Measure the cone of each C4 clutch reaction plate (1) at dimension A.

The maximum cone is 0.4 mm (0.0157 inch).





6. Measure the thickness of the C4 spring plate (1) at dimension A.
The minimum thickness is 3.11 mm (0.1224 inch).
7. Measure the cone of the C4 spring plate (1) at dimension A.

The maximum cone is 0.4 mm (0.0157 inch).