68. C5 Clutch Plate Inspection

C5 Clutch Plate Inspection

Important
^ Measure as described below at three or more locations.
^ Check the plates for coning on a level surface.
^ Replace any parts not meeting Specifications.





1. Measure the thickness of each C5 clutch friction plate (1) at dimension A.
Thickness
Minimum thickness is 2.375 mm (0.0935 in).
2. Measure the oil groove depth of each C5 clutch friction plate (1) at dimension B.
Oil Groove Depth
Minimum groove depth is 0.200 mm (0.0079 in).





3. Measure the cone of each C5 clutch friction plate (1) at dimension A.
Cone
Maximum cone is 0.225 mm (0.0089 in).





4. Measure the thickness of each C5 clutch reaction plate (1) at dimension A.
5. Minimum thickness is listed in the specification table Selective Components Specifications.