Instrument Panel Cluster (IPC) - Replacement

INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT

REMOVAL PROCEDURE




1. Remove the instrument panel accessory trim plate.
2. Remove the screws from the instrument panel cluster.
3. Disconnect the electrical connector from the instrument panel cluster.
4. Remove the instrument panel cluster from the instrument panel.

INSTALLATION PROCEDURE




1. Install the instrument panel cluster to the instrument panel.
2. Connect the electrical connector to the instrument panel cluster.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the screws to instrument panel cluster.

Tighten
Tighten the screws to 1.9 N.m (17 lb in).

4. Install the instrument panel accessory trim plate.