Wiper Arm Replacement - Rear

WIPER ARM REPLACEMENT - REAR

REMOVAL PROCEDURE




1. Put the wiper arm in the park position.
2. Remove the washer hose from the vehicle connector.
3. Remove the cap from the wiper arm.
4. Remove the nut from the wiper arm.
5. Remove the wiper arm from the wiper motor shaft.

INSTALLATION PROCEDURE




1. Install the wiper arm on the wiper motor shaft in the park position with the wiper arm resting on the park ramp.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the nut on the wiper arm.

Tighten
Tighten the nut to 23 N.m (17 lb ft).

3. Install the cap on the wiper arm.
4. Install the washer hose on the vehicle connector.