Torque Specifications

Connecting Rod Bolts
First Pass 20 Nm (15 ft. lbs.)
Final Pass 85 degrees
Crankshaft Balancer Bolt
Installation Pass
to Ensure the Balancer is Completely Installed 330 Nm (240 ft. lbs.)
First Pass
Install a NEW Bolt After the Installation Pass and Tighten as Described in the First and Final Passes 50 Nm (37 ft. lbs.)
Final Pass 140 degrees

Install the NEW M8 bearing cap side bolts





Crankshaft Bearing Cap Bolts - Inner Bolts
First Pass in Sequence 20 Nm (15 ft. lbs.)
Final Pass in Sequence 80 degrees
Crankshaft Bearing Cap Bolts - Outer Bolts
First Pass in Sequence 20 Nm (15 ft. lbs.)
Final Pass in Sequence 51 degrees
Crankshaft Bearing Cap Side Bolts 25 Nm (18 ft. lbs.)
Engine Block Coolant Drain Plugs 60 Nm (44 ft. lbs.)
Engine Block Heater 40 Nm (30 ft. lbs.)
Engine Block Oil Gallery Plugs 60 Nm (44 ft. lbs.)