Track Bar Replacement

Track Bar Replacement

Removal Procedure





1. Raise and support the vehicle.
2. Support the rear axle.
3. Remove the park brake cable retaining clips to remove the parking brake cable from the track bar.





4. Remove the track bar retaining nuts.
5. Remove the track bar retaining bolts.
6. Remove the track bar from the vehicle.

Installation Procedure





1. Install the track bar to the vehicle.
2. Install the track bar retaining bolts.

Notice: Refer to Fastener Notice in Cautions and Notices.

Important: Do not tighten the bolts unless the suspension is at the curb height position.

3. Install the track bar retaining nuts.
^ Tighten the bolts to 105 Nm (77 ft. lbs.).





4. Install the parking brake cable and retaining clips to the track bar.
5. Remove the rear axle support.
6. Lower the vehicle.