Marker Lamp Replacement - Rear Side
MARKER LAMP REPLACEMENT - REAR SIDEREMOVAL PROCEDURE
1. Locate the marker lamp gasket towards the wheel and gently lift the gasket edge to expose the service slot.
2. Insert a stiff wire as shown into the slot and push to release the marker lamp (1,3) locking tab from the flare.
3. Grasp the marker lamp (1,3) and pull towards the wheel to remove.
4. To remove the bulb socket from the marker lamp, turn the socket counterclockwise.
5. Pull the bulb to remove the bulb socket.
INSTALLATION PROCEDURE
1. To install the bulb, gently push until seated into the bulb socket.
2. To install the bulb socket to the marker lamp, turn the socket clockwise.
3. Insert the marker lamp tab (1,3) and then press to secure locking tab to flare.