Temperature Control Cable Replacement

TEMPERATURE CONTROL CABLE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the accessory trim plate.
2. Remove the mounting screws from the HVAC control assembly.




3. Remove the temperature cable (4) from the retaining clip and remove the temperature cable.
4. Remove the temperature cable (4) from the temperature control cam (5).
5. Fully open the I/P storage compartment.




6. Remove the temperature control cable from the retaining clip.
7. Remove the temperature control cable (9) from the temperature actuator cam (10).
8. Remove the temperature control cable.

INSTALLATION PROCEDURE




1. Install the temperature cable (4).
2. Install the temperature control cable (9) to the temperature actuator cam (10).
3. Install the temperature cable to the retaining clip.




4. Install the temperature cable (4) to the temperature control cam (5).
5. Install the temperature cable (4) to the retaining clip.
6. Install the mounting screws to the HVAC control assembly.

Tighten the screws to 1.9 N.m (17 lb in)

NOTE: Refer to Fastener Notice in Service Precautions.

7. Install the accessory trim plate.