Differential Side Bearings Replacement

Differential Side Bearings Replacement

^ Tools Required
- J 8092 Universal Driver Handle- 3/4 in - 10
- J 21784 Side Bearing Installer
- J 22888-D Side Bearing Puller Kit
- J 45231 Differential Side Bearing Installer

Removal Procedure





1. Remove the differential.
2. Remove the differential side bearings by performing the following steps:
2.1. Install the differential assembly in a vise.
2.2. Install the J 22888-20A (2) and the J 8107-2 (1), as shown.
2.3. Remove the differential side bearings using the J 22888-20A.
3. Remove the differential assembly from the vise.

Installation Procedure





1. Install the differential side bearings by doing the following:
1.1. In order to protect the differential case, install the J 8107-2 in the case on the side opposite the bearing installation.
1.2. Install the J 45231 (2), and the J 8092 (1) onto the differential case bearing as shown.
1.3. Drive the bearing onto the case using the J 45231 (2) and the J 8092 (1).
2. Install the differential.