Brake Switch - TCC: Service and Repair

Torque Converter Clutch/Cruise Control Release Switch Replacement

Removal Procedure





1. Disconnect the electrical connector from the torque converter clutch/cruise control release switch.
2. Complete the following in order to remove the torque converter clutch/cruise control release switch from the brake pedal bracket:
1 Rotate the switch counter clockwise.
2 Pull the switch from the retainer.
3 Push the locking tabs inward to release the retainer.

Installation Procedure





1. Slide only the torque converter clutch/cruise control release switch retainer into the brake pedal bracket, until the locking tabs are fully engaged.
2. Connect the electrical connector to the torque converter clutch/cruise control release switch.
3. Adjust the torque converter clutch/cruise control release switch.