Instrument Panel (IP) - Accessory Trim Plate Replacement

TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY

REMOVAL PROCEDURE




1. Carefully use a plastic flat-bladed tool to release the trim plate retaining clips.
2. Remove the trim plate from the instrument panel (I/P).
3. Disconnect the electrical connectors, as necessary.
4. If necessary, remove the center air outlets.

INSTALLATION PROCEDURE




1. If necessary, install the center air outlets to the trim panel.

IMPORTANT: Attach the center air outlets to the trim plate before installing the trim plate to the I/P.





2. Install the electrical connectors, as necessary.
3. Position the trim plate to the I/P.
4. Ensure the retaining clips are indexed to the corresponding slots provided in the I/P.
5. Seat the trim plate retaining clips to the I/P.