Fuel Gage Inaccurate or Inoperative

FUEL GAGE INACCURATE OR INOPERATIVE

DIAGNOSTIC AIDS
- Ensure that the fuel level is in the same range as the customer concern.
- For intermittent diagnosis, refer to Testing for Intermittent Conditions and Poor Connections in Diagnostic Aids.
- Refer to Fuel Level Specifications in order to verify the correct fuel level sensor readings. The Fuel Level Sensor parameter is available in the scan tool in the powertrain control module (PCM) data list.

TEST DESCRIPTION

Steps 1 - 4:

Steps 5 - 13:

The numbers below refer to the step numbers on the diagnostic table.
3. This step tests for a high resistance in the signal circuit and the low reference circuit of the fuel level sensor.
13. DTCs will be set in the PCM when you perform this diagnostic table.