Engine Mount Replacement - Right
Engine Runout Replacement- RightRemoval Procedure
1. Raise and suitably support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the engine shield if equipped.
4. Support the engine using a jack stand and a block of wood.
5. Remove the engine mount-to-frame bracket through bolt for the mount being replaced.
6. Loosen the left side through bolt.
7. Raise the engine using the jack stand. The engine will tilt to one side.
8. Remove the engine mount bolts.
9. Remove the engine mount. You will need to articulate the mount in order to remove the mount.
Installation Procedure
1. Install the engine mount. You will need to articulate the mount in order to install the mount.
2. Install the engine mount bolts.
Notice: Refer to Fastener Notice in Service Precautions.
3. To aid in the installation of the bolts, start a bolt in position (1) first.
^ Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
4. Lower the engine.
5. Install the engine mount-to-frame bracket through bolt.
^ Tighten both of the engine mount-to-frame bracket bolts to 85 Nm (63 ft. lbs.).
6. Remove the jack stand.
7. Install the engine shield, if equipped. .
8. Install the wheel and tire assembly.
9. Lower the vehicle.