86. Water Pump Installation

Water Pump Installation

^ Tool Required
- J 41240 Pulley Holding Tool





1. Install the NEW water pump gasket.
2. Install the water pump.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the water pump bolts.
^ Tighten the water pump bolts to 10 Nm (89 inch lbs.).





4. Install the water pump pulley.
5. Install the water pump pulley bolts.
6. Install J 41240 to hold pulley.
7. Tighten the water pump pulley bolts.
^ Tighten the water pump pulley bolts to 25 Nm (18 ft. lbs.).
8. Remove J 41240.