Rear Axle Shaft Seal and/or Bearing Replacement

Rear Axle Shaft Seal and/or Bearing Replacement

^ Tools Required
- J 8092 Universal Driver Handle- 3/4 in - 10
- J 21128 Axle Pinion Oil Seal Installer
- J 23690 Bearing Installer
- J 2619-01 Slide Hammer
- J 44685 Rear Axle Seal and Bearing Remover

Removal Procedure
1. Raise the vehicle.
2. Remove the tire and wheel assembly. .
3. Remove the axle shaft.
4. Using the J 44685 (1) and the J 2619-01 (2), remove the axle shaft bearing and seal.

Installation Procedure
1. Using the J 23690 (1) and the J 8092 (2), install the axle bearing.
2. Using the J21128, install the axle shaft seal.
3. Install the axle shaft.
4. Install the tire and wheel assembly. .
5. Fill the rear axle with axle lubricant. Use the proper fluid.
6. Lower the vehicle.