Microphone Replacement - Radio Volume Compensator Interior

MICROPHONE REPLACEMENT - RADIO VOLUME COMPENSATOR INTERIOR

REMOVAL PROCEDURE
1. Remove the overhead console.




2. Disconnect the microphone electrical connector (3).
3. Remove the 2 retaining screws to the microphone.
4. Remove the microphone (2) from the overhead console.

INSTALLATION PROCEDURE




1. Install the microphone (2) to the overhead console.
2. Install the 2 microphone retaining screws.

Tighten the screws to 0.8 N.m (7 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Connect the microphone electrical connector (3).
4. Install the overhead console.